Someone can say to me the difference between the Neumotor 1509/.5 Y and the Neumotor 1509/1 D ,
someone have some information about the Rpm/Volt and
Amp ,Prop ,Efficiency,Max Cells ,etc..
With Best Regards
Belfenson.
The .5Y motors are a real pain to produce. The 1D is much easier to make and specs out VERY close to the .5Y. The .5Y may be going away as a result. I haven't seen specs for either motor yet, but I just talked with Steve about the two motors last weekend.
Hi Davesieger
Thank you for your information ,I have be grateful to you if you can get some more information about the motor´s for me
With Best Regards from Spain.
Originally Posted by davesieger
The .5Y motors are a real pain to produce. The 1D is much easier to make and specs out VERY close to the .5Y. The .5Y may be going away as a result. I haven't seen specs for either motor yet, but I just talked with Steve about the two motors last weekend.
Just got my GUNTHER in the mail today!
It is one of the 1509/1D with 6.7:1 and it is going to make my hoot (later destined for my zoom) the fastest climbing 10-cell hoot around!
Greg
How many amps can you expect to draw using the 1509/1D on 3300s or 3700s? I know it depends on the prop but those motors seem really hot.
For the best effeciency they should run above 160 Amps
Dave, you need use your checked bag weight allotment of 50lbs/bag and load them up with goodies. Bring them east!
Hi Argarre ,Which is the weight of the motor and the RPM/volt? |
Post at 2-6 01:23 PM
| This Author's Posts Only
